Table of Contents
Advertisement
Intensive drying
In the final rinse the appliance operates
at a higher temperature and therefore an
improved drying result is obtained.
(Caution if utensils are fragile!)
Hold down programme button A and
press main switch until
display illuminates.
Release both buttons.
The LED for button A flashes and
the digital display
9
setting
(off) or
To change the setting, press
programme button A .
Switch off the main switch
Downloaded from DishWasher-Manual.com Manuals
the digital
1
displays the factory
(on).
.
1
Additional functions
*
on some models additional functions
can be set with the buttons.
2
Soaking *
The soaking cycle runs before the main
programme and must be selected before
the programme starts. In this additional
programme cooking utensils, e.g. pans,
bowls, etc., can be soaked and prerinsed
in the bottom basket.
It is recommended to put approx. 5 g of
detergent on the door.
Saving time (VarioSpeed) *
The >>Save time<< function can reduce
the running time by approx. 20% to 50%
depending on the selected rinse
programme. The particular change in
the running time is indicated on the time
remaining display. To obtain optimum
cleaning and drying results at a reduced
running time, water and energy
consumption are increased.
Half load*
If you have only a few items to wash (e.g.
glasses, cups, plates), you can switch to
"Half load". The "half load" additional
function saves water, energy and time. It is
recommended to put a little less detergent
in the detergent dispenser than for a full
load.
Bottom basket washing
only *
If there are only a few utensils (e.g. plates,
pans, bowls), use the bottom basket.
The top basket must be empty!
Use slightly less detergent than
is recommended for a complete load.
en
19
Advertisement
Table of Contents
