Specification; General Specification - LG 32LH7000 Service Manual

NOTE : Specifications and others are subject to change without notice for improvement.
1. Application range
This specification is applied to the LCD TV used LD91D
chassis.
2. Requirement for Test
Each part is tested as below without special appointment.
1) Temperature : 25±5ºC (77±9ºF), CST : 40±5ºC
2) Relative Humidity : 65±10%
3) Power Voltage : Standard input voltage(100~240V@50/60Hz)
* Standard Voltage of each products is marked by models.
4) Specification and performance of each parts are followed
each drawing and specification by part number in
accordance with BOM.
5) The receiver must be operated for about 5 minutes prior to
the adjustment.

4. General specification

No Item
1 Display Screen Device
2 Aspect Ratio
3 LCD Module
4 Operating Environment Temp. : 0 ~50 deg
5 Storage Environment
6 Input Voltage
7 Power consumption
8 Module Size
9 Pixel Pitch
10 Backlight
11 Display Colors
12 Coating
Copyright © 2009 LG Electronics. Inc. All right reserved.
Only for training and service purposes
Downloaded From TV-Manual.com Manuals

SPECIFICATION

Specification
32 wide Color Display Module
16:9
32" TFT LCD FHD 100Hz
Humidity : 20 ~90 %
Temp. : -20 ~60 deg
Humidity : 10 ~90 %
AC100-240V~, 50/60Hz
Power on (White)
32" LGD Typ : 110, Max : 120
32" LGD 760.0(H) x 450.0(V) x 48.00mm(D)
32" LGD 0.36375(H) x 0.36375(V)
16 EEFL
1.06B(true) colors
3H(Hard coating)
3. Test method
1) Performance: LGE TV test method followed
2) Demanded other specification
- Safety: CE/IEC specification
- EMC: CE/IEC
LCD
LGD
LCD(Module) + Backlight(Lamp)
With inverter
- 6 -
Remark
LGE Internal Use Only