Alert Only Mode; Traveling With The Alert Mode On - Magellan Maestro 4050 User Manual

Alert Only Mode

This mode will not provide you with new routing information, it will only alert you to the event.
Access the Main Menu and select User Options.
1.
Scroll down the list and select Traffic Options
2.
Select Traffic Selection.
3.
Check the Traffic Active option and make sure the Use alternative route option is deselected.
4.
Select the Alert Options button on the screen. A
5.
new screen appears on which you can set the
options relevant to the Alert mode.
Check one or more of the following options:
Live Alert: When checked, the receiver will
inform you of a traffic event located along your
route as soon as it is detected.
Reminder at 40 mi: If you check this option, the receiver will remind you of the traffic event
it has received earlier. The message will appear when this event, located somewhere along
your route, is 40 miles away from your current location (not a point-to-point distance but
measured along the route).
Reminder at 20 mi: Same as above but the distance from the event is only 20 miles
Reminder at 10 mi: Same as above but the distance from the event is only10 miles
Select Save to validate your choices and then come back to your usual guidance screen.
6.

Traveling with the Alert Mode On

When you use the TrafficKit in the Alert Mode, the following will occur when new Traffic events are
received:
• If an event affects your route, a warning message will appear on the screen at a time or
distance defined in the Alert Options menu.
• If you do not acknowledge the message by pressing the ENTER button, it will
automatically disappear after 10 seconds. Additional warning messages, if any, will appear
in turn on the screen.
• Events that affect your route will also appear as road signs in the maneuver list, and also
in the lower part of the True View screen. See examples below:
• The map screen will show road signs corresponding to the Traffic events, including those
which do not affect the route. You can obtain detailed information on any event by
selecting the icon on the map screen. A dialog box will open containing a description of
the event.
Traffic 41