Battery Connection - Magellan 750M Installation & Reference Addendum

Vehicle navigation made portable
Table of Contents

Advertisement

Battery Connection

It is important that the Battery be connected to the Battery Cable before using the 750
system. Please be sure that the Battery is attached to the Battery Cable each time the system is
used.
Battery
Power
Adapter
Battery Charger
Upon first use of the 750
Battery to the Battery Cable. Verify that the Battery is connected correctly using the 'BATTERY
TEST' button. When pressed, the Battery Status Indicator should illuminate indicating the
charge of the battery. A reading of 70% or greater is preferred. Refer to 'Battery Charger' in
the 'Operations' section for further details.
DO NOT operate the system without the Battery attached to the
!
Battery Cable. A 12-volt power source exists at the Battery Cable
conductors even if the Battery is removed during 750
Battery
Charger
System Configuration Diagram
or if the Battery has become disconnected, be sure to connect the
M
Display
Test Button
8
Navigation
Computer
GPS
Antenna
operation.
M
M

Advertisement

Table of Contents
loading

Table of Contents