To Connect Using Wps; Pbc (Push Button Configuration) Method - TP-Link TL-WDN3800 User Manual

TL-WDN3800

3.2 To connect using WPS

WPS (Wi-Fi Protected Setup) function allows you to add a new wireless device to an existing
network quickly.
If your wireless Router supports WPS or QSS (Quick Security Setup), you can establish a
wireless connection between wireless card and Router using either Push Button Configuration
(PBC) method or PIN method. Three WPS connection methods are listed in the following parts,
while the third method is only supported in Windows XP and Windows Vista.

3.2.1 PBC (Push Button Configuration) method

1. Press the WPS or QSS button on the Router. Here we use Router TL-WDR4300 as an
example. Press the WPS/Reset button for 2~3 seconds.
N600 Wireless Dual Band PCI Express Adapter User Guide
Figure 3-8
13