Fujitsu E Series User Manual page 84

Problem
Notebook fails to recognize
DVD/CDs. (continued)
The DVD/CD-ROM Access
indicator on the Status
Indicator Panel blinks at
regular intervals when no
DVD/CD is in the tray or
the DVD/CD-ROM drive is
not installed.
Docking Problems
Notebook does not turn
on when installed in
Docking Station.
Floppy Disk Drive Problems
You cannot access your
floppy disk.
Possible Cause
Wrong drive designator was
used for DVD/CD in the
application.
Windows DVD/CD auto inser-
tion function is disabled.
DVD/CD is dirty or defective.
The Windows DVD/CD auto
insertion function is active and
is checking to see if a DVD/CD
is ready to run.
LANdock AC adapter is not
plugged in.
Notebook is not properly
seated in the LANdock.
You tried to write to a write
protected floppy disk.
Floppy disk is not
loaded correctly.
BIOS setup utility states
Diskette Controller:
Disabled.
The floppy disk drive may not
be properly installed.
Security is set to protect access
to floppy disk data.
T r o u b l e s h o o t i n g
Possible Solutions
Verify the drive designator used by the application is
the same as the one used by the operating system.
When the operating system is booted from a DVD/
CD, drive designations are automatically adjusted.
Start the DVD/CD from the desktop or application
software or re-enable the Windows DVD/CD auto
insertion function. (See Automatic Insertion Func-
tion on page 60 for more information)
Wipe DVD/CD with a non-abrasive CD cleaning
cloth and reinsert. It if still will not work try another
DVD/CD in the drive.
This is normal. However, you may disable this feature.
(See Automatic Insertion Function on page 60 for
more information)
Provide power to the LANdocking Station.
Remove and re-dock your notebook and verify that
the Docked LED illuminates.
Eject the floppy disk and set it to write enable. (See
SuperDisk™ 120 or Floppy Disk Drive on page 53 for
more information)
Eject floppy disk, check orientation and re-insert.
(See SuperDisk™ 120 or Floppy Disk Drive on page 53
for more information)
Revise the setup utility Main menu settings to
enable Diskette Controller. (See BIOS Setup Utility
on page 41 for more information)
Remove and re-install your floppy disk drive. (See
Flexible Bay Devices on page 26 for more information)
Verify your password and security settings.
75