Listening To Music; Viewing Still Pictures Or Videos On The Ipod - Denon AVR-1908 Owner's Manual

• With the default settings, the iPod can be used connected to the VCR
(iPod) connector.
• Use the RESTORER mode to expand the low and high frequency
components of compressed audio files and achieve a richer sound.
The default setting is "Mode3" .
• Press <ON/STANDBY> and set the AVR-1908's power to the standby
mode before disconnecting the iPod. Also switch the input source
to one to which the menu "iPod dock" is not assigned before
disconnecting the iPod.
NOTE
• Depending on the type of iPod and the software version, some
functions may not operate.
• DENON will accept no responsibility whatsoever for any loss of iPod
data.

Listening to Music

1
[ui]
Use to select the menu, then press
[p]
to select the music file to be played.
2
[ENTER] [p]
Press or .
Playback starts.
Stopping playback temporarily
During playback, press [ENTER] or [1].
Press again to resume playback.
Fast-forwarding or fast-reversing
During playback, either press and hold [u] (to fast-reverse) or [i] (to
fast-forward), or press [6] or [7].
To cue to the beginning of a track
During playback, either press [u] (to cue to the previous track) or [i]
(to cue to the next track), or press [8] or [9].
To stop
During playback, either press and hold [ENTER] or press [2].
Playing repeatedly
Press [CHANNEL –].
[Selectable items] All One OFF
MENU : "Input Setup" – "iPod" – "Repeat"
Shuffling playback
Press [CHANNEL +].
[Selectable items] Albums Songs
MENU : "Input Setup" – "iPod" – "Shuffle"
To switch between the Browse and Remote modes
Either press and hold [MODE].
• The title name, artist name and album name can be checked by
pressing [STATUS] during playback.
• On the AVR-1908, folder and file names can be displayed as titles. Any
characters that cannot be displayed are replaced with " . (period)" .
• The time for which the on-screen display are displayed can be set
at menu "Manual Setup" – "Option Setup" – "On-Screen Display"
– "iPod Information" (vpage 29).
Viewing Still Pictures or Videos on the
[ENTER]
or
iPod
Photo and video data on the iPod can be viewed on the monitor.
Only for iPod equipped with slideshow or video functions. (When
using an ASD-1R)
1
Press and hold
2
Watching the iPod's screen, use
"Photos" or "Video".
3
[ENTER]
Press
displayed.
"TV Out" at the iPod's "Slideshow Settings" or "Video Settings" must
be set to "On" in order to display the iPod's photo data or videos on
the monitor. For details, see the iPod's operating instructions.
(vpage 32)
OFF
(vpage 32)
[MODE]
to set the Remote mode.
[ui]
to select
until the image you want to view is