JVC KS-FX850R Service Manual page 4

KS-FX850R/KS-FX835R/KS-FX820R
Removing the bottom cover
1. Turn the body upside down.
2. Insert a screwdriver to the two joints d and two
joints e on both sides of the body and the joint f on
the back of the body, then detach the bottom cover
from the body.
Removing the rear panel
1. Remoe the front chassis.
2. Remove the heat sink.
3. Remove the bottom cover.
4. Remove the five screws B attaching the rear panel
and one screw C attaching the pine jack on the
back of the body.
Removing the main amplifier board
assembly
1. Remove the front chassis.
2. Remove the bottom cover.
3. Remove the rear panel.
4. Remove the two screws D attaching the main
amplifier board assembly on the top cover.
5. Disconnect connector CP701 on the main amplifier
board assembly from the cassette mechanism
assembly.
2-2
(See Fig.5)
(See Fig.6 )
B
(See Fig.7)
d
f
Fig. 5
Fig. 6
Main board assembly
D
Fig. 7
Bottom cover
e
C
B
B
D
CP701