(115V/15A or 230V/7.5A, Single Phase/20 gallon, 2 HP)
(115V/15A or 230V/7.5A, Single Phase/11 gallon, 1 HP)
Instructions for Installation/Set-up, Operation, Maintenance, & Storage
NorthStar® Models 25653 and 25654 belt-driven compressors have a single stage 2-cylinder pump, made with
heavy-duty cast iron cylinders for long life, and a compact design rated for 135 maximum PSI. NorthStar® Model
48578 belt-driven compressor has a single stage 1-cylinder pump, made with heavy-duty cast iron for long life, and a
compact design rated for 135 maximum PSI. Their continuous-duty rating ensures long-lasting performance, and its
cast iron pump head ensures superior heat dissipation.
Read and understand this Owner's Manual completely before using. Keep this manual for future review. Failure to
properly set up, operate and maintain the compressor in accordance with this manual could result in serious injury or
death to operator or bystanders.
WARNING: SPECIAL HAZARDS
Injection Injury: High-pressure air stream can pierce skin and underlying tissues, leading to serious injury and possible
amputation. Such an injection injury can result in blood poisoning and/or severe tissue damage.
Flying Debris: High-pressure air stream can cause flying debris and possible surface damage.
Not For Breathing Air: NorthStar compressors are NOT designed, intended, or approved for supplying breathing air. No
compressed air should be used for breathing unless air is treated in accordance with applicable standards.
Fire/Explosion: Sparks from air powered tool heads or attachments can ignite fuel or other flammable liquids or vapors in
the vicinity. Exceeding the maximum pressure for air tools or attachments could cause them to explode.
Burns: Compressor pump, motor and discharge tubing are hot surfaces that can cause burn injuries.
Electric Shock: Operating equipment in wet conditions or where not properly grounded can cause electric shock.
Detailed safety information about these hazards appears throughout this manual.
Inspect Upon Delivery: FIRST! Inspect for missing or damaged components. See "Initial Set-Up" section for where
to report missing or damaged parts.
Add Pump Oil: Pump is NOT shipped with oil. Check the pump oil level before starting. See "Prepare for Operation"
section of this Owner's Manual for capacity and viscosity.
Use Mechanical Lifting Equipment: Compressor may be too heavy to handle manually. Use proper lifting
equipment for unloading and moving to installation site.
Ensure Air Compressor is Electrically Connected Correctly: All wiring, grounding, and electrical connections
must be made by a competent electrician. Install according to local and national codes.
Run Pump Unloaded for Break-in Period: Before initial use, open drain valve and run compressor for 30 minutes
to break in pump parts.
Follow Maintenance Schedule: Pump, air filter, and tank require periodic inspection and servicing to provide
efficient function and long life. See "Maintenance & Repair" for frequency of servicing.
Owner's Manual
Electric Portable Air Compressor
Equipment Protection Quick Facts
M25653C.3
ITEM NUMBER: 25653, 25654, 48578
SERIAL NUMBER: _____________
1