Connections - Panasonic TH-40CX610Z Operating Instructions Manual

Connections

●
External equipment and cables shown are not
supplied with this TV.
●
Please ensure that the unit is disconnected from the
mains socket before attaching or disconnecting any
cables.
●
Check the terminal type and cable plugs are correct
for connection.
●
Use a fully wired HDMI compliant cable.
● Keep the TV away from electronic equipment (video
equipment, etc.) or equipment with an infrared sensor,
otherwise distortion of image / sound may occur or
operation of other equipment may be affected.
●
Please also read the manual of the equipment being
connected.
Terminals
4 5
1 USB 1 - 3 port
2 HDMI3
3 AV IN (COMPONENT / VIDEO)
4 ETHERNET (p. 9)
5 Aerial terminal
Satellite terminal
6 DIGITAL AUDIO OUT
7 HDMI1 - 2 (p. 9, 10)
●
To watch content in 4K format, use HDMI terminal.
(p. 9)
8
English
1
2
3
6
(p. 10)
(p. 8)
(p. 9)
Basic connections
■
Mains lead
Insert the mains plug firmly into place.
■
Aerial
TV
RF cable
Aerial
●
For Digital TV, Analogue TV
●
Keep RF (aerial) cable away from the mains lead to
avoid and minimise mains interference pickup.
●
Do not place the RF cable under the TV.
An aerial, correct cable (75 Ω coaxial) and correct
●
terminating plug are required to obtain optimum
quality picture and sound.
●
If a communal aerial system is used, you may require
the correct connection cable and plug between the
wall aerial socket and the TV.
●
Your local Television Service Centre or dealer may
be able to assist you in obtaining the correct aerial
7
system for your particular area and the accessories
required.
●
Any matters regarding aerial installation, upgrading
of existing systems or accessories required, and
the costs incurred, are the responsibility of you, the
customer.
Mains lead
(supplied)
●
When disconnecting the mains lead,
be absolutely sure to disconnect the
mains plug from the mains socket
first.
AC 220-240 V
50 / 60 Hz