10.13 Installing The Handset Battery Pack - NEC Univerge SV9100 Hardware Manual

Issue 1.2

10.13 Installing the Handset Battery Pack

5 - 144
2. To remove the clip, press the retaining clip in toward the belt clip blade
and slide the clip up at the same time.
Before installing batteries, refer to D
Specifications and Battery Safety. It is important to follow safety regulations
when handling batteries.
1. Remove the battery cover by pressing the latch and sliding the cover
down and off of the handset.
Figure 5-167 Removing the Belt Clip
term ®
Cordless DECT Owner's Manual
Figure 5-168 Removing the Battery Cover
Installing DT Series Digital and IP Multiline Terminals
UNIVERGE SV9100