Page 1
������������������������������������������������������������������������� ������� ����� �������������� ������������������������������������������ ����������� �������� ������������������������������������������� ������������������������������������������� ������������������������ ����� ���������������������������������������������������������������������������������������������������������� ����������������������������������������������������������������������������������������������� QUAD EQ O W N E R ’ S M A N U A L ��� ��� �� ����� ���� �� ���� ����� �� �� ���� ��...
(service) dans le livret d’instruction accompagnant l’appareil. QUAD EQ 13. Unplug this apparatus during lightning storms or when unused for long periods of time.
Introduction Thank you for choosing the Quad EQ processor from Mackie. It is part of a family of digital outboard gear based on our TT24 digital mixer engineering develop- ments. We thought it would be good to share the love, not to mention the design and engineering expertise developed during the TT24 program.
Quad EQ, go ahead and connect the inputs and outputs the way you want them. The following steps show how to use the Quad EQ in a simple stereo system using channels A and B: Turn off the power switch on the rear panel.
Quad EQ. For example, if your mixer’s left main output is coming into the Quad EQ channel-A in- put, and the Quad EQ is off, the same signal will appear at the channel-A output jack. These inputs and outputs are line-level,...
MIC, then the LEDs show the signal levels of each filter from the measurement microphone. The Quad EQ can display both the EQ setting and RTA results simultaneously, making it an extremely unique live sound tool. The EQ settings are displayed as a single QUAD EQ ���...
Press this button to bypass the currently-selected EQ channel. The incoming signals will pass through to the outputs of the Quad EQ, without being affected by any changes in EQ or other controls. The button will illumi- nate when a channel is bypassed.
This prevents you from accidentally turning on the noise during a heavy thrash-speed-metal concert, or during a memorial service for a sound engi- neer who turned the noise on accidentally at a similar concert. QUAD EQ �� � � ���...
16. FILTER button This button provides you with access to the variable high-pass and low-pass filters of the current EQ chan- nel. Pressing the FILTER button engages and disengages these two pass filters at their currently edited settings. For the high-pass filter, the signal level of the fre- quency range below the filter frequency is attenuated by an amount determined by the high-pass filter slope.
This can be useful for graphic EQs for monitor wedge mixes. A feedback frequency can be easily identified and cut using the Quad EQ in this way. EQD (EQ display) This option allows you to turn off the EQ filter set- ting display during RTA operation, so you can oper- ate the device purely as an RTA.
18. MIC button Pressing this button will engage the measurement mi- crophone input as the source for the analysis function, and it will light the button solid. The gain structure for this microphone input is set for the included measurement microphone, and 48 V phan- tom power is continuously applied to the input.
EQ settings as a “snapshot” for later recall. Only the levels of the 30 filters are stored. Up to 99 snapshots can be stored on the Quad EQ. To avoid accidentally storing over a favorite snapshot, the STORE button has to be pressed for two seconds.
Details concerning Warranty Service are spelled out in the Warranty section on page 23. If you think your Quad EQ has a problem, please do ev- erything you can to confirm it before calling for service. Doing so might save you from the deprivation of your Quad EQ and the associated suffering.
You must have a Service Request Number before you can obtain warranty service. Keep this owner’s manual and the detachable linecord. We don’t need them to repair the Quad EQ. Pack the Quad EQ in its original package, includ- ing endcaps and box. This is VERY IMPORTANT.
The sleeve is the common ground (earth) for both sig- nals. The send from the mixer to the input of the Quad EQ is carried on the tip, and the return from the output of the Quad EQ to the mixer is on the ring. SLEEVE RING...
Therefore, we reserve the right to change these specifications at any time without notice. “Mackie,” and the “Running Man” are registered trademarks of LOUD Technologies Inc. All other brand names mentioned are trademarks or registered trademarks of their respective hold- ers, and are hereby acknowledged.
B. Failure to register online or return the product registration card will not void the two-year warranty. C. Service and repairs of Mackie products are to be performed only at a factory-authorized facility (see D below). Unauthorized service, repairs, or modification will void this warranty.
Quad EQ Quick Keys CHANGE AN EQ LEVEL 1.25k GROUP-ADJUST EQs hold 1.25k hold RESET AN EQ TO 0 dB EDIT RESET ALL EQS TO 0 dB hold EDIT Channel SELECT CHANNEL A STEREO LINK A and B hold hold...