Sony SLV-797HF Operating Instructions Manual page 25

5 Enter your DSS receiver code number and push
the joystick to .. For details, see page 38.
6 Set your DSS receiver
output channel (BOX
OUTPUT CH) to LINE
and press the joystick
(OK).
Automatic clock setting
Once you've set up the VCR, it automatically sets the clock the first time you
turn off the VCR. After that, whenever you turn off the VCR, it checks the
time and adjusts the clock, even for Daylight Saving Time. The VCR sets the
clock by picking up a time signal provided by some TV channels.
If you want to use the timer to record right away, or if the channels in your
area do not carry time signals, set the clock manually. For details, see page
36.
Note
• To successfully record a program from the DSS receiver, proceed as follows:
– Leave the DSS receiver on all the time.
– Turn off the display (menu screen, channel number, etc.) of the DSS receiver.
– To record or receive locked channels, unlock the channel before the VCR starts
recording.
– To set pay-per-view programs in the timer setting, order the pay-per-view
program before the VCR starts recording.
– Some programs are copy protected. You cannot record these programs.
SET UP CABLE BOX
CABLE BOX CONTROL
CABLE MOUSE ON OFF
BOX CODE NO. 6 50
BOX OUTPUT CH LINE
Use t o s e l e c t CABLE
B OX C H . T h e n push OK
SET UP CABLE BOX
CABLE BOX CONTROL
CABLE MOUSE ON
BOX CODE NO. – ––
BOX OUTPUT CH CH3
En t e r y o u r CABLE BOX
Cod e No. u s i n g 0 – 9 k e y s
Re f e r t o t h e Ope r a t i n g
Ma nu a l f o r t h e Cod e
SET UP
SET UP i s d o n e
/
.
Normal display
continued
Getting Started
OFF
25