Modification 6 — Solo Tie For Mixermixer Application - Mackie CR-1604 Owner's Manual

Main PCB
solder side
Add Jumper (d)
Modification 6 — Solo Tie
FOR MIXERMIXER APPLICATION
This modification connects the solo function
of multiple CR-1604's.
1. Follow steps 1 through 5 at the bottom
of page 31.
2. Solder an insulated wire (d) from one
mixer to another at point A
3. Follow steps 9 to 11 at the bottom of
page 31.
Any internal modification of the CR-1604
must be performed by a competent electronic
technician. Mackie Designs accepts no respon-
sibility in the event of improperly performed
modifications or other damages and, in such
cases, may declare warranty privileges void.
SOLO TIE FOR MIXERMIXER APPLICATION
A
Modification 6
To same point on other CR-1604
TECH
STUFF
POD
b b
a
MAIN CHASSIS
POD
MAIN CHASSIS
POD
35