Assembling The Juicer - Salton JE1483 Instruction Booklet

ASSEMBLING THE JUICER

1. Assemble the Juice Bowl on the
Base by lining up the arrow on the
main housing and the arrow on the
Juice Bowl.
2. Place the Sweeper Basket inside the
Juice Bowl.
3. Place either the Juice Strainer or the
Smoothie Strainer inside the Juice
Bowl so that the red dot on the Strainer
lines up with the red dot on the
Juice Bowl.
4. If using the Frozen Dessert Strainer,
remove the Sweeper Basket and place
only the Frozen Dessert Strainer inside the Juice Bowl. Align the
red dot on the Strainer with the red dot on the Juice Bowl.
5. Place the Auger in the center of the Juice Bowl. Gently push the
Auger down and twist until you hear it click into position.
6. Place the Cover onto the Juice Bowl.
IMPORTANT: Line up the red dot on the
Cover with the red dot on the Juice Bowl.
Turn the Cover clockwise until you hear it
lock into position.
HOW TO USE
1. Ensure that all parts are securely in place then plug into the wall
outlet.
2. Place one Container under the Pulp Chute and one of the containers
or a glass under the Juice Spout.
3. There are three settings on the Switch:
ON - this starts the motor for juicing
OFF – Stops the motor and operation
REVERSE – Moves the Auger in the opposite direction
JUICING
1. Wash all food to be juiced. If necessary, cut fruits or vegetables
into wedges to fi t into the Food Chute. Fruits with hard pits such as
peaches, nectarines, apricot, plum, mango, avocados, cherries, etc
must have the hard pit removed before juicing. Fruits with hard or
Bowl
Base
5