e_kl567_16.fm Page 25 Wednesday, April 23, 2008 11:42 AM
ATTACHING THE LENS HOOD
In order to avoid the deterioration in image quality from internal reflection, use of the lens
hood is recommended.
a
a.
Screw-on Type (DA 70mm f/2.4 Limited dedicated lens hood)
Screw the hood on to the front of the lens to attach it.
The hood is telescopic. Extend it fully to use it.
Memo:
The lens hood cannot be mounted on some circular polarizing filters that are not
produced by PENTAX, depending on the type.
25
25