Rear Seats; Folding Up The Rear Seat Cushion - Ford 2015 F-150 Owner's Manual

E142554
Saving a PreSet Position
1. Switch the ignition on.
2. Move the memory features to your
desired positions.
3. Press and hold button 1 for about two
seconds until you hear a single tone.
To program position 2, repeat the previous
procedure using button 2.
Note: You can save a memory preset at any
time.
Recalling a PreSet Position:
Press and release the preset memory
button desired. The memory features move
to the position stored for that preset.
You can recall a programmed memory
position:
• When the ignition is off.
• Only if the transmission is in park (P)
or neutral (N) if the ignition is on.
You can program a remote entry
transmitter to recall a memory setting.
See Keys and Remote Controls (page
51).
You can also program a personal keyless
entry code to recall a memory setting. See
Locks (page 62).
F-150 (TFC), enUSA, Third Printing
Seats
Easy Entry and Exit Feature
Equipped)
If you enable the easy entry and exit
feature, it automatically moves the driver
seat rearward 2 inches (5 centimeters)
when you switch the ignition off.
If the seat is located less than 2 inches (5
centimeters) from the rear of the seat
track, the seat travels less than 2 inches
(5 centimeters) rearward.
The driver seat returns to the previous
position when you switch the ignition on.
You can enable or disable this feature in
the information display. See Information
Displays (page 103).

REAR SEATS

Folding Up the Rear Seat Cushion

The rear seat has a split 60/40 cushion.
You can flip each seat cushion up into a
vertical storage position.
E181250
Rotate the seat cushion up until it locks
into the vertical storage position.
145
(If