Table of Contents
Advertisement
E194174
To gain access to the outlet contacts, press
the plug against the outlet and rotate in the
direction indicated on the auxiliary cover.
You can use the power point for powering
electrical devices that require up to 150
watts. The power point is on the rear of the
center console.
Auxiliary Power Points
When the indicator light, located on the
power point, is:
•
On — the power point is working, the
ignition is on and a device is plugged in.
•
Off — the power point and ignition are
off, and you do not have a device
plugged in.
•
Flashing — the power point is in fault
mode.
The power outlet temporarily turns off power
when in fault mode if the device exceeds the
150 watt limit. Unplug your device and switch
the ignition off. Switch the ignition back on,
but do not plug your device back in. Let the
system cool off and switch the ignition off to
reset the fault mode. Switch the ignition back
on and make sure the indicator light remains
on.
Do not use the power point to power electric
devices such as:
•
Cathode ray tube type televisions.
•
Motor loads, such as vacuum cleaners,
electric saws and other electric power
tools, compressor-driven refrigerators,
I n f o r ma t i o n P r o v i d e d b y :
etc.
158
•
Measuring devices, which process
precise data, such as medical equipment,
measuring equipment, etc.
•
Other appliances requiring an extremely
stable power supply:
microcomputer-controlled electric
blankets, touch sensor lamps, etc.
CIGAR LIGHTER
E103382
Press the element in to use the cigar lighter.
It will pop out automatically.
Note: Do not hold the cigar lighter element
pressed in.
Advertisement
Table of Contents
Troubleshooting
