Port Forwarding - D-Link DIR-600L User Manual

Section 3 - Configuration
This will allow you to open a single port or a range of ports.
Rule:
Check the box to enabled the rule.
Name:
Enter a name for the rule.
IP Address:
Enter the IP address of the computer on your local
network that you want to allow the incoming service
to.
Start Port/
Enter the port or ports that you want to open. If you
End Port:
want to open one port, enter the same port in both
boxes.
Traffic Type: Select TCP, UDP, or Any
D-Link DIR-600L User Manual

Port Forwarding

DIR-600L
27