Getting Started; Software Installation - M-Audio MIDISport 1x1 User Manual

IMPORTANT: The OMS MIDI driver is provided for use with Mac OS 9.2.2. You MUST
have a sequencer that supports OMS and have OMS properly installed in order to
use the MIDISPORT (this does not apply to Mac OS X).

Getting Started

Here is an outline of the steps needed to begin using your MIDISPORT on either a Mac
or a PC:
1. Install the MIDISPORT software (see "Software Installation"). Mac OS 9 users must first install
OMS (included on CD or available by download from our MIDISPORT "Drivers" page).
2. Attach the MIDISPORT to your computer (see "Hardware Installation").
3. Hook your keyboards and sound modules to the MIDISPORT (see "Setting Up Your
MIDI Studio").
4. Configure the MIDISPORT in your application software (see "Using the MIDISPORT in
your Application Software").

Software Installation

Your MIDISPORT comes with software that allows it to communicate with your specific
operating system and platform (PC or Mac). Please locate the operating system for
your computer in this section and follow the instructions. MIDISPORT's "driver" software
will load during this installation.
Your MIDISPORT has a USB connector for a standard USB cable, which is supplied with
the unit. When you are asked to connect your MIDISPORT during the driver software
installation, simply plug the "device end" of the USB cable into your MIDISPORT and
plug the "computer end" of the cable into your computer's USB port. The "computer
end" and "device end" can be easily identified by their size and shape.
5