Earphone Care And Maintenence; Using The Cleaning Tool; Suggestions For Using Ear Tips - M-Audio IE-10 User Manual

Professional reference earphones
Hide thumbs Also See for IE-10:
Table of Contents

Advertisement

10
|
10
IE Professional Reference Earphones
E
ARPHONE
M
AINTENENCE
Keep earphones clean by using a moistened
<
antiseptic wipe after each use.
Avoid exposing your earphones to water,
<
extreme temperatures, high humidity or
prolonged exposure to ultraviolet light.
Use the cleaning tool regularly to keep the
<
ear conductor clear and unobstructed.
Clean and change the ear tips regularly.
<
Avoid
physical
<
Dropping or striking them may damage the
components.
Do not pull on the cables to remove the
<
earphones from your ear.
Do not pull the cables to remove the input
<
plug from a listening device.

Using the Cleaning Tool

Remove ear tip and wipe the exterior of the
<
ear conductor with an antiseptic wipe.
Using the cleaning tool, angle into the ear
<
conductor and use a gentle upward and
outward sweeping motion to remove any
build-up.
Clean the ear conductor again with an
<
antiseptic wipe and attach a new and clean
ear tip.
C
ARE AND
abuse
of
earphones.
|
User Guide
S
UGGESTIONS FOR
U
E
SING
AR
If the ear tips on the earphones don't seal well
<
or are uncomfortable, try some alternate ear
tips until the best fit for your ear is achieved.
If you have difficulty inserting the ear tip into
<
your ear canal, identify the left earphone
(marked with an "L") and the right earphone
(marked with an "R"). Inserting them one
at a time, gently grasp the top ridge of your
ear and extend the ear upward and outward
to open up the ear canal while you rock the
earphone forward and then roll it back into
your ear canal.
Flanged silicone ear tips: For best results,
<
moisten the external surface of the flanged
silicone ear tip before you insert it into the ear
canal. This will allow the ear tip to slide more
easily into place and create a good seal.
Disposable foam ear tips: Compress the
<
foam at the end of the earphone by pressing
it between your thumb and forefinger before
inserting it into the ear canal. Hold the
earphone in place for five seconds while the
foam expands to create a tight seal in the ear
canal.
T
IPS

Advertisement

Table of Contents
loading

Related Products for M-Audio IE-10

This manual is also suitable for:

Ie-20xbIe-30

Table of Contents