Refrigerant - Mercedes-Benz CLA Operator's Manual

Service products and filling capacities
352
Windshield washer system
Important safety notes
G WARNING
Windshield washer concentrate is highly flam-
mable. If it comes into contact with hot engine
components or the exhaust system it could
ignite. There is a risk of fire and injury.
Make sure that no windshield washer con-
centrate is spilled next to the filler neck.
! Do not add distilled or de-ionized water to
the washer fluid container. Otherwise, the
level sensor may be damaged.
! Only MB SummerFit and MB WinterFit
washer fluid should be mixed together. The
spray nozzles may otherwise become
blocked.
Comply with the important safety notes for
service products when handling washer fluid
( page 347).
Y
At temperatures above freezing:
Fill the washer fluid reservoir with a mixture
X
of water and windshield washer fluid, e.g.
MB SummerFit.
Add 1 part MB SummerFit to 100 parts water.
At temperatures below freezing:
Fill the washer fluid reservoir with a mixture
X
of water and washer fluid, e.g. MB Winter-
Fit.
Adapt the mixing ratio to the outside temper-
ature.
Down to 14 ‡ (Ò10 †): mix 1 part MB Win-
R
terFit to 2 parts water.
Down to Ò4 ‡ (Ò20 †): mix 1 part MB Win-
R
terFit to 1 part water.
Down to Ò20.2 ‡ (Ò29 †): mix 2 parts MB
R
WinterFit to 1 part water.
i
Add windshield washer fluid, e.g. MB
SummerFit or MB WinterFit, to the washer
fluid all year round.
Climate control system refrigerant
Important safety notes
The climate control system of your vehicle is
filled with refrigerant R‑134a.
The instruction label regarding the refrigerant
type used can be found on the left, on the
underside of the hood.
! Only the refrigerant R‑134a and the PAG
oil approved by Mercedes-Benz may be
used. The approved PAG oil may not be
mixed with any other PAG oil that is not
approved for R-134a refrigerant. Other-
wise, the climate control system may be
damaged.
Service work, such as topping-up refrigerant
or replacing components, may only be carried
out by a qualified specialist workshop. All
applicable regulations must be adhered to,
SAE standard J639 included.
Always have work on the climate control sys-
tem carried out at a qualified specialist work-
shop.
Refrigerant instruction label
Example: refrigerant instruction label
Warning symbol
:
Refrigerant filling capacity
;
Applicable standards
=
PAG oil part number
?
Type of refrigerant
A