Physical Interface - TP-Link TL-PA8010P User Manual

Item
Powerline LED
Ethernet LED

Note:
Five minutes after the device connected to the powerline adapter is turned off, the powerline adapter will
automatically switch to Power-Saving Mode.

1.5 Physical Interface

There are four types of physical interfaces on this powerline adapter.
Integrated Electrical Socket
Ethernet Port
Interface
Ethernet Port
*
Power Plug
Pair Button
Integrated
Electrical Socket
* The provided power plug may differ from the picture due to different regional power specifications. Here
we take the EU version as an example.
TL-PA8010P
Status
Yellow-green Powerline network is in good condition.
Powerline network is in poor condition. We recommend
Red
trying another wall socket.
The powerline adapter is not connected to any powerline
Off
network or is in Power-Saving Mode.
On/ Off The Ethernet port is connected or not connected.
A 10/100/1000 Mbps Ethernet port for connecting the adapter to the PC or the
broadband device with a network cable.
A power plug for connecting the adapter to an AC power socket (100–240V~,
50/60Hz).
Press and hold for 1 second to set up or join a secure powerline network.
Press and hold for 8 seconds to leave an existing powerline network.
Press and hold for more than 15 seconds to reset the powerline adapter.
Use as an electrical outlet expansion for power strip or household appliances.
It can remove some electrical noise that might affect powerline performance.
AV1200 Gigabit Passthrough Powerline Adapter
Indication
Description
3
Power Plug
Pair Button