External Ir Connection; Front Ir Disable - Russound TS3 Installation Manual

EXTERNAL IR CONNECTION / FRONT IR DISABLE
The TS3 Touchscreen has an External IR Receiver In terminal for
connecting an external IR Receiver such as the Russound 858,
SaphIR 862 Eye, or SaphIR 860 Phantom.
Use 2 twisted pair wire with one pair connecting GND
(GROUND) and IR (SIGNAL) and the other pair connecting ST
(STATUS) and V+ (+12VDC). Do not connect the shield to the IR
receiver terminals.
If using an external IR receiver, you can avoid "double" receipt
of IR signals sent from a remote by disabling the keypad's IR
receiver (see screen example below). From the Home screen,
select Options. Select Screen Setup, then press and hold
Installers Setup until the Installer Setup screen appears. Select
Front IR Receiver.
Disable Front IR Receiver
10 Russound TS3 Installation Manual
DO NOT
CONNECT
SHIELD

External IR connection

Russound 858
IR receiver (back)
2 twisted
pair cable
Shield wired
to ground