Pairing Status For Standard Bluetooth Devices - Siemens easyTek User Manual

Pairing standard Bluetooth devices:
Press and simultaneously until the blue LED
X
flashes . This takes approximately 5 seconds.
easyTek searches for devices nearby.
Set up your Bluetooth device to search for other
X
Bluetooth devices. Refer to the device's manual.
On the Bluetooth device, select "easyTek" from the list
X
of detected devices.
If requested, enter the PIN "0000".
X
Pairing may take several seconds.
The blue LED indicates the pairing status:

Pairing status for standard Bluetooth devices

flashing, then on for 5 seconds, then off
➧
Pairing has been completed successfully.
You can now use the Bluetooth device.
flashing, then off
➧
Pairing was not successful. In this case, ensure that the
Bluetooth device is within operating distance and try again.
20
Tips:
You can also use the easyTek App for pairing.
■
To cancel pairing, press
■
The blue LED goes off.
shortly.
21