Remote Control Functions - Konftel 200 User Manual

Accessories
21

Remote control functions

Lifts and replaces the "handset" regardless of
whether Konftel 200 is in menu mode. If the
Phonebook is displayed, the number shown will be
called.
Enter the number or write the name. #/ shifts
–
between capitals and small letters.
Enters and exits menu mode.
OK in menus, lifts and replaces the "handset". Dials
the speed dial number.
Deletes characters when dialling numbers or writing
names. Exits from menus.
Used for operator services, e.g. for three-party calls.
When a speed dial number is saved in the Phonebook
–
or edited, it may be stored by ending the program-
ming with a function key instead of OK. The number
behind the key is called in all menu modes other than
programming. NOTE: A function key is overwritten
without prior warning when a new number is stored.
Tunes the Konftel 200 to the acoustic environment of
the room.
Adjusts the volume, leafs through the Phonebook and
scrolls through the menus.
Mute function. Switches the microphones on and off.
Inserts a pause in speed dial numbers.
Calls the last number dialled regardless of the menu
mode.
Konftel 200 • User Guide