To Cancel Stride Length Measurement Mode; After Starting The Workout - Omron Jog style Instruction Manual

HJA-300-E_A_M.book Page 8 Monday, February 22, 2010 12:02 PM
5 Press for 2 seconds to end the workout.
The stride length blinks after measurement.
Note: If you want to make further adjustments, press
to adjust the stride length.
6 Press to confirm the stride length.
The Workout time/distance display appears.
Note: The distance display for future workouts will be calculated
using the new stride length setting.
■

To cancel stride length measurement mode

[Before starting the workout]
1 Press or to change the distance display to
"- - - - km".
2 Press .
Stride length measurement mode ends and the Workout
time/distance display appears.

[After starting the workout]

To cancel stride length measurement mode during the
workout, you must end the workout.
Stop the workout (refer to step 5) and enter the original stride
length.
8
and