Sherwood S5 Operating Instructions Manual page 30

Troubleshooting
REMOTE REPEATER/LEARNING
Problem
The volume of the main
unit and TV increases
simultaneously.
The main unit does not
learn the operation of TV
remote control.
The TV remote control is
not working even if you use
TV remote control signal
transmission function.
30
Your TV received the signal from TV remote control, having learned the
•
operation of the main unit. Adjust the volume by using the remote control of
the main unit.
• Reposition the main unit.
• Disconnect the power cable and perform the remote control learning
operation again.
• Use the remote control of the main unit.
Operate the remote learning process again. (Refer to page 19.)
•
• Try to use the TV remote control signal transmission function again after
repositioning the IR repeater of the main unit and the remote control sensor
of your TV.
• Remove the obstruction between the main unit and your TV.
Restart the main unit and check the indicator status.
•
Remedy