Summary of Contents for Lucent Technologies Uninterruptible Power Systems 3000 VA
- Page 5 Quick Start...
- Page 9 Table of Contents...
- Page 11 Introduction...
- Page 15 Safety Warnings...
- Page 31 Installation...
- Page 47 UPS Operation OUTPUT ON ALARM SILENCE OUTPUT OFF INPUT ON OVERLOAD LOAD OR BATTERY CONDITIONS OUTPUT ON ON BATTERY OR BYPASS...
- Page 55 Communication...
- Page 58 UPS SERIAL COMMUNICATIONS MENU SELECT OPERATION MODE > DISPLAY CONFIGURATION > CONTINUOUS DUMP > POLLED DUMP > SMART DUMP > ASCII TERMINAL > VT100 TERMINAL > PRINTER DUMP > LAN CONFIGURATION > SET BAUD RATE > QUIT WITHOUT SAVING NEW CONFIGURATION >...
- Page 59 SELECT LAN CONFIGURATION 1 > NOVELL > AS400 > 3-COM/LAN MANAGER > CUSTOM CONFIGURATION > TO QUIT THIS MENU ENTER SELECTION >+> SELECT CUSTOM LAN CONFIGURATION Instructions: Choose the desired inverter shutdown function. Warning: It is recommended that this feature should not be used with normal RS-232 communications, conflicts may occur.
- Page 60 SELECT CUSTOM LAN CONFIGURATION Instructions: Choose the desired contact configuration. 1 > UTIL_FAIL is active closed, LOW_BATT is active closed > UTIL_FAIL is active open, LOW_BATT is active closed > UTIL_FAIL is active closed, LOW_BATT is active open > UTIL_FAIL is active open, LOW_BATT is active open >...
- Page 63 Specifications...
- Page 67 Troubleshooting...
- Page 71 Index...