To Change Your Outgoing Message By Remote; To Turn On The Answering System By Remote; Call Screening; Memo (Personal Message) Recording - Sanyo CLA-1380 Service Manual

Cordless telephone answering system
Hide thumbs Also See for CLA-1380:
Table of Contents

Advertisement

OPERATION
u
To changa your outgoing
massaga by ramote
1. Dial your phone number and
Iiten to your outgmmg mes-
sage.
2. After you hear the beep at the
end of the outgoing message,
enter your remote access code.
The message tape rewinds and
plays back your messages.
After the last message, 3 beeps
sound.
3. After 3 beeps, press "7" imme-
diately
4. Record your new outgcxng
message.
5. Press "8 to fresh recording,
Walt a moment. Your new
outgoing message WIII play
back automatwally.
6. Hang up after you hear the new
outgoing message.
If you change your outgoing
message, the message tape
rewinds to the begmnmg and
any new messages are recOrd-
ed over the old ones.
To turn off the answering
system by remote
1. Dial your phone numbar and
hsten to your outgoing mes-
sage.
2. After you hearths beep at the
end of the outgoing message,
enter your remote access code,
3. Press "O".
4. Hang up.
The answenng system turns off
automatiilly.
Room monitoring
The CLA-1380AUS
lets you
momtor the ambient sound of the
room where the answering system
Is lxatad.
1. Dial your phOne number and
Itistento your outgoing mes-
sage.
2. After you hear the baep at the
end of the outgoing message,
enter your remote access code.
3. Press "5" to begin monitoring.
After 30 swonds you hear a
*P
and the answering system
hangs up automatically.
4. To hsten for another 30 sec-
onds, press "5" again lmmedh
ately after the beep.
To turn on the answering
system by remote
If you have left your home or office without Seftlng the und to the auto
answer mti,
YOUcan Set it fmm any Touch-Tone telephone.
1. Dial your phone number.
2. Let the phone ring 16 times.
-—-———-
After 16 rings, the unit plays
back your outgoing message
:-a@@:
and 3 beeps sound.
3. After 3 baapa, no sound is
;@@@;
heard for appmximatefy 10
seconds.
4. Withtn these 10 saccmds. enter
:@@@:
b
your remote access code.
L———-
The unil atdomafbally resets to
the auto answer mode.
@@:@"
5. Hang up.
10
reset
the answering
system by remote
When the tape is fully racorded, the unit shuts off. But you can retrieve
recorded messages by remote as follows
1. Dial your phone number.
2. Let the phone ring t 6 times.
After 16 rings, the unit plays
back your outgoing message
:-@@@:
and 3 beeps sound.
3. Affer 3 beeps, no sound IS
;mmm~
~
heard for approximately 10
seconds.
4. Within these 10 seconds, enter
!@@@;
L— ___
your remote access cwle.
.— ---
The message taps rewinds and
W;@
pkl~ back.
---
At the end of the last message,
3 beeps sound,
5. After 3 beeps, press '2" (within 10 seconds).
6. Hang up.
The message tapa rewinds, and the unit automafiialiy resets to the auto
answer retie.
OTHER ANSWERING
SYSTEM
FEATURES
CALL SCREENING
This cordless telephonelanswering
system lets you monitor incommg calla,
from the base slahon or the handset, to avOid unwanfed calls.
Sa8e
station:
1. Sat the VOLUME controf to the
correct position to fet you hear
messages.
2. If you de not wish to speak to
the caller, let the answering
system rscord tfw message.
If yw wmh to speak to a caller,
pick up the handset from the
base stabon.
3. When you hmsh speaking to the
caller, return the handset to the
base stabon cradle. The unit
returns automatlcalfy to the
auto answer mode.
Handset:
ff the handset is not on the base
station cradle, the REMOTE
indicator flashes while the ilcom-
ing message ia recorded.
1. To monitor tfw ikwommg
message, press the REMOTE
button. If you wish to speak to
the caller, press the TALK
button.
2. When you ftmsh speaking to the
calfar, Dress the END button.
The utit returns automatically
to the auto answer mode,
EXTENSION
PHONE DISCONNECT
If you pck up an extension phone while a call IS bamg answerad, the unit
autOmatkSlly dmconnects from the tine to let you take the call.
If you pickup while a message is bamg recordad, the call IS counted as am
call.
If you pick up while your outgoing message IS being played, the call is not
counted.
OTHER ANSWERING
SYSTEM
FEATURES
MEMO (PERSONAL
MESSAGE)
RECORDING
You can leave a memo (a recorded personal message) that can be retnevad
manualty or by remote control by anyone who has access to the answenng
system.
NOTES
1.
2.
3.
4.
"-The call counter counts memos as messa~es
Memo recordings csn be as long as the a~ailable message tape.
Make sure tha unit is in the auto
HI
"->
answer mcde. (See page 27.)
fj
\ y.. ..:,,::,:;,,
f. : :>,::,..,.,.,..
Press the MEMO REC bunon.
:cs:z:~.:>><.,
:::, * ,: .......
. .... . . .. ...
..
....
......
Record a message using the
.—
-
,,..... ..?..+..>.,5
,,.,.,.,:
:.,,,,,
buWin mcmphone
(MIC).
.............L
_
-—-
When you have finishad
,—
7
.
,,,
racording your message, press
the MEMO REC button again.
/'
/2&
Microph~ne
MEMO REC
(MIC)
button
-lo–

Advertisement

Table of Contents
loading

Table of Contents