6.02 Regulating the flow rate, pre-ignition and speed of opening of the main gas valve
14
Supplied By www.heating spares.co Tel. 0161 620 6677
Adjusting flow rate
·
After unscrewing the screws, remove the top cover.
·
Use a 12-mm hex spanner.
·
Turn clockwise to reduce the flow rate or anticlockwise to
increase it.
·
Replace the cover and the screws.
Fig. 7a
Adjusting pre-ignition
·
After unscrewing the screws, remove the top cover.
·
Turn the central regulating screw with a screwdriver.
·
Turn clockwise to reduce and anticlockwise to increase it.
·
Replace the cover and the screws.
Fig. 7b
Adjusting opening speed
·
After removing the screws, remove the top cover.
·
Turn the side regulating screw with a screwdriver.
·
Turn clockwise to reduce the flow rate and anticlockwise to
increase it.
·
Replace the cover and the screws.
Fig. 7c
Pegasus F3