Brother FAX-170 Service Manual page 57

• When setting the recording paper cover on the control panel, first insert the right and left
front corners under sections "X" of the control panel and put the cover into place. Make
sure that the main-panel harness and main-mike harness* are routed as shown below.
Control panel
"X"
Boss "Y"
Panel lock arm
Main-panel harness
Main-mike harness*
• After securing the recording paper cover with the screws, be sure to route the main-panel
harness and the main-mike harness* through the groove provided on the recording paper
cover and then set the panel lock arm to keep those harnesses in place, as illustrated
below.
Boss "Y"
Panel lock arm
Main-panel harness
Recording paper cover
* Provided on the FAX-270MC/290MC/
520DT/520MC/MFC370MC/390MC.
Recording paper cover
Main-mike harness*
IV – 13