Special Features; Water Filter - Bissell Steam Mop 1005-E SERIES User Manual

S
pecial features
Removable water tank
The water tank is located on the back
of the Steam Mop. It can be refilled with
water any time during use. Distilled or
demineralized water may be used in
place of tap water.
Do not use chemicals with your
Steam Mop.

Water filter

This filter removes minerals and other
impurities from tap water, preventing
water deposits from damaging your
Steam Mop. It should be replaced when
the bright green grains turn blue. To
maximize performance of the filter, dis-
tilled water may be used.
Ready light
The ready light will glow when the
Steam Mop is ready to use.
steam on demand trigger
Press to release steam.
Manoeuvrable swivel head
When cleaning in the manual mode,
press the spray trigger to release water
and formula onto the area to be cleaned.
Microfibre mop pads
These washable, reusable microfibre
pads feature buit-in Microban® anti-
bacterial protection to help prevent the
growth of 99.9% of harmful bacteria on
the pad surface to keep your pad fresher
between uses.
O
perations
Getting ready
The mop pad may have already come
attached to the swivel head, if not follow
steps 1A and 1B below.
1. Attach mop pad
A. Set swivel head in mop pad, making
sure the drawstring is located on
the back
B. Tighten mop pad by pulling on the
drawstring while pressing on
the toggle.
6
w w w . b i s s e l l . c o m
Tip:
Do not attempt to use
your Steam Mop without
water in the tank.
1A 1B