Main Menu Buttons -
Installation Settings
Fan Off Delay
Runs the fan for a short time after Cooling or electric strip heat
turns off to increase system efficiency. (0 - 120 Secs.)
Sensor Settings
Control Sensor
When a remote sensor is connected to the thermostat, the user
may choose which sensor source is used to measure room temperature.
•
Thermostat sensor only
•
Remote Sensor only
•
Average remote/thermostat
Wired Sensor Use
The wired sensor may be used as follows:
•
Outdoor sensor
•
Remote Sensor
•
Supply Sensor
•
Return Sensor
Calibrate Sensors
The thermostat and wired sensor may be calibrated -7 to +7 degrees F .
The integral humidity sensor may be calibrated -20% to +20% RH
Test Outputs
The installer or service
technician can use this
feature to test the
functions without any
time delays of the
thermostat.
Settings
(Continued)
(thermostat )
(remote)
(0˚)
With a 1st stage cooling call, Y1 and G are active
41
(0s)