Operation
Switching the device on/off
■
To switch the device on, press and hold the multifunction button
hear an acoustic signal and the control lamp
now in standby mode.
■
To switch the device off , press and hold the multifunction button
4 seconds until you hear an acoustic signal and the control lamp
in red.
Communication between rider and pillion passenger
When the main unit and pillion unit are installed in the helmets:
1) Attach the spiral cable
socket
2) Insert the jack plug
pillion unit.
3) Switch the appliance on.
4) Press the button
versation with the pillion passenger, press the button
■
If you are already carrying on a telephone conversation via Bluetooth, press
the
to end the conversation with the pillion passenger, press the
again. The device switches back to telephone mode and the telephone conver-
sation is resumed.
■
If you are listening to music via Bluetooth, press the
is muted but continues playing in the background. As soon as you end the
conversation with the pillion passenger by pressing the
music can be heard again.
NOTE
►
To increase the volume in the rider's speakers
press the V+ button
►
To decrease the volume in the rider's speakers
press the V- button
►
To increase the volume in the pillion passenger's speakers
(pillion unit), press the V+ button
►
To decrease the volume in the pillion passenger's speakers
(pillion unit), press the V- button
SMFB 2.1 A1
with the micro USB plug
20
on the main unit.
4
of the spiral cable
21
to talk to the pillion passenger. To end the con-
8
button
. The telephone conversation is put on hold. When you want
8
3
.
.
5
lights up in blue. The device is
7
to the micro USB
22
into the socket
20
button
button
(main unit),
9
(main unit),
9
.
2
.
GB
until you
6
for around
6
lights up
7
on the
19
again.
8
button
8
. The music
8
, the
8
18
18
11
IE