Evaluation Board; Structure; Connection - Panasonic AN30182A-EVB User Manual

Regulations
1824S02E
No.
2

Evaluation Board

This section describes Structure, Connection and Main Test Points of Evaluation Board.

2.1 Structure

Evaluation Board consists of
IIC connector of AN30182A Evaluation Board is connected to CN1 of USB Microcontroller Board by a cable.
IIC
AN30182A Evaluation Board

2.2 Connection

Evaluation Board should be connected to PC with USB Cable as Figure 3.
PC
Note: The parameters above is subject to change for improvement without notice.
2013-05-15
Revised
User's Guide
for Evaluation Board
AN30182A Evaluation Board
Figure 2. Structure of Evaluation Board
USB Cable
Figure 3. Connection of Evaluation Board and PC
and USB Microcontroller Board
CN1
JP1
USB Microcontroller Board
※1 Only JP1 should be shorted.
（AN30182A Evaluation Board is connected to
USB microcontroller Board by a cable）
Automotive & Industrial Systems Company, Panasonic Corporation
AN30182A-EVB
Total Pages Page
24 5
as figure 2.
Evaluation Board