Assembling The Recording Module And The Recording Extension Module; Using An External Dc Power Supply - Panasonic AU-VEXT1G Operating Instructions Manual

Assembling Extension Modules
Assembling the recording module and the recording extension
module
1
Align the upper lock angle at the front of the recording module with the upper lock plate
at the rear of the recording extension module. (Fig. 1)
2
Firmly push in the recording module and connect the connection terminals of the
recording extension module and recording module. (Fig. 2)
NOTE
@
t You cannot join the modules together if the V edge of the recording extension module is down. (Fig. 3)
Push down the recording extension module release lever of the recording extension module to raise the
V edge. (Fig. 4)
t Do not touch the mechanical parts near the V edge. The V edge will move quickly, which may cause
injury.

Using an external DC power supply

1
Connect the external DC power supply to the <DC IN> terminal of the camera extension
module.
2
Turn on the power switch of the external DC power supply (if the external DC power
supply has a power switch).
3
Supply power to the recording module.
4
Set the <POWER> of the recording module to <ON>.
16
Fig. 1
Fig. 3
Fig. 2
Fig. 4