Security Level; Set Up Security Level; Access Codes; Change Pin Code - Nokia 2112 User Manual

S e t t i n g s ( M e n u 4 )

Security level

The security level determines your
access to features when a
"non-owner" UIM card is used. A
"non-owner" UIM card is one (other
than the original) that is inserted
after you power off the phone.

Set up security level

1. At the standby screen, select
Menu > Settings
settings > Security
press Select.
2. Enter the security code and press
OK.
3. Scroll to None, Memory, or
and press Select.
Off — Owner and Non-owner
cards are treated the same.
Memory — Non-owner cards can
access UIM memory. Any changes
to the memory setting requires
the security code. The owner card
has access to all features, but the
security code is required to
change a memory setting.
Phone — The security code is
required upon power-up.
4. A message appears in the display
confirming your selection.
42
> Security
level, and
Phone
Copyright © 2004 Nokia. All rights reserved.

Access codes

Note: Avoid using codes
similar to emergency
numbers such as 911 to
prevent accidental dialling of
the emergency number.
The PIN code and security code
control access to features such as
the security level and are supplied
with the phone. The preset PIN code
is 1234 and preset security code is
12345. Once you change the code,
keep the new code secret and in a
safe place separate from your phone.
Note: If you enter the wrong
security code five times in
succession, you will not be
able to enter a code for five
minutes, even if you power
off the phone between
incorrect entries.

Change PIN Code

Before you can change your PIN
code, you'll need to enable PIN code
request. See "PIN code" on page
1. Press Menu > Settings
settings > Access codes
PIN code.
2. Enter the current PIN code and
press OK.
3. Enter the new PIN code and press
OK.
41.
> Security
> Change