Temperature Adjustment During Auto; Fan Speed - Mitsubishi Heavy Industries SRK63ZM-S User Manual

Temperature adjustment during AUTO

■ Air temperature adjustment is possible even during automatic operation. There are 6 levels of adjustment possible with the
the button.During automatic operation, 24°C is preset both for heating and cooling.

FAN SPEED

■ You can choose the capacity of your air-conditioner when heating mode, cooling mode or fan mode.
When a change in temperature is required.
1
Press the" or
When it is a little cold
Press the button.
■ Each time the
button is pressed, the switch over occurs in the following order
–6 → –5 → ............ –1 → ±0 → +1 ............ +6.
When +6 is indicated, even if the
change.
When it is a little hot
Press the button.
■ Each time the
button is pressed, the switch over occurs in the following order
+6 → +5 → ............ +1 → ±0 → –1 ............ –6.
When –6 is indicated, even if the
Setting
-6 -5 -4
temp.(°C)
18 19 20
Point the remote control toward the air-conditioner, and
1
Press the FAN SPEED button.
Each time the button is pressed, the fan speed changes.
AUTO
Operation capacity by your choice
Set automatically by microcomputer
Silent operation
Energy-saving operation
Standard operation
Powerful operation with high capacity
NOTE
• When FANSPEED is changed from HI to LO or ULO, the sound of re-
frigerant flowing may be heard.
– 12 –
(TEMP)" button.
button is pressed, the indicator does not
button is pressed, the indicator does not change.
Remote Control display
+ 0
-3 -2 -1 +1 +2
21 22 23 24 25 26
ULO LO MED
button or
+3 +4 +5 +6
27 28 29 30
HI
FAN SPEED
AUTO
ULO
LO
MED
HI