Mount The Camera - D-Link DCS-2330L Quick Install Manual

Refer to the steps below to assist you with mounting the
camera. We recommended that you configure the camera first,
before mounting it.
Place the mounting plate where you
1
want to position the camera and
mark the holes where you will place
the screws.
Depending on the material of the
2
wall or ceiling, use the proper tools
to drill two holes where you drew
the marks.
Note: If the wall is made out of concrete,
drill the holes first and insert the plastic
anchors to support the screws.
When you place the mounting plate
3
over the holes that you drilled in the
wall, make sure you align the holes.
Use the supplied screws to attach
the mounting base to the surface of
the wall.

Mount the Camera

9