Advertisement
PoweR & BatteRy
Plug the power cord into a standard AC power outlet to power the unit. This unit requires 6 C-size, batteries (not included) for battery power.
Cd
Loading and Playing a CD/MP3 CD
1. Open the CD door and place a CD in the
boombox, label side facing up.
2. Close the CD door.
3. Slide the source switch to CD mode.
4. Press the Play/Pause button to begin playing
the loaded disc.
Programming a CD/MP3 CD
1. Press the stop button to stop a loaded CD.
2. Press the Program button.
"P01" will blink on the display.
3. Press the skip/search buttons to select a track.
4. Press the Program button to add the selected
track to the program.
5. Repeat steps 4 and 5 to program up to 20 tracks
to play in a specified order.
6. Press the stop button to cancel a program.
InteRnatIonal suPPoRt
To download this User's Guide in English, Spanish, or French, or to get answers to frequently asked
questions, visit the support section at:
www.gpx.com
Para descargar este Manual del Usuario en inglés, español y francés, o para obtener respuestas a
preguntas frecuentes, visite la sección de apoyo en:
www.gpx.com
Pour télécharger ce guide de l'utilisateur en anglais, espagnol ou français, ou pour obtenir des
réponses à des questions fréquemment posées, consultez la rubrique d'assistance sur:
www.gpx.com
For Warranty Information and the most up-to-date version of this User's Guide, go to www.gpx.com
Customer Service: 1-888-999-4215 | Email Support: prodinfo@dpiinc.com | Email Parts: partsinfo@dpiinc.com
Copyright © 2014 Digital Products International (DPI, Inc.) All other trademarks appearing herein are the property of their respective owners. Specifications are subject to change without notice.
usB
Playing Audio from a USB Drive
1. Insert a USB drive and slide the source switch
switch to USB mode.
2. Press and hold the Pause/Play button to switch
between CD and USB modes.
3. Press the Play/Pause button to begin playing
audio files on the USB drive. Use the controls on
the boombox to pause, play, or skip tracks.
RadIo
Radio Reception
An AM/FM antenna is built into the radio. To improve
radio reception, adjust the position of the boombox.
Playing the Radio
1. Slide the source switch switch to AM or FM
radio mode.
2. Adjust the tuning dial to tune the radio.
3.5 MM audIo InPut
Using the Line In
3.5 mm audio input cable not included.
1. Plug one end of a 3.5 mm audio input cable into
the line In input on the back of the unit, and
plug the other end of the cable into the audio
output on an MP3 Player or other audio source.
2. Press the Power button to power the unit on.
3. Slide the source switch on the front of the unit
to line In.
4. Audio played through the connected device will
now be heard through the speakers.
Advertisement
