Adjusting The Cec Settings; Turning The Power Indicator On Or Off - Vizio D39h-C0 User Manual

Adjusting the CEC Settings

The California Energy Commission (CEC) function on your
TV enables you to control HDMI-connected devices with the
included remote without any additional programming.
Not all HDMI devices support CEC. See your device's
user manual for details.
To enable, disable, or adjust CEC settings:
1. Press the MENU button on the remote. The on-screen menu is
displayed.
2. Use the Arrow buttons on the remote to highlight System
and press OK. The SYSTEM menu is displayed.
3. Use the Arrow buttons on the remote to highlight CEC and
press OK. The CEC menu is displayed.
4. Use the Arrow and OK buttons to adjust each setting:
• CEC - To use CEC, you must select On.
• Device Discovery - Use this function to determine if your
device is connected and supports CEC.
5. Press the BACK button to change additional settings or EXIT.

Turning the Power Indicator On or Off

The Power Indicator on the front of your TV normally does not
glow when the TV is on. You can change this setting if you prefer
the light to be on.
To turn the Power Indicator Light on or off:
1. Press the MENU button on the remote. The on-screen menu is
displayed.
2. Use the Arrow buttons on the remote to highlight System
and press OK. The SYSTEM menu is displayed.
3. Highlight Power Indicator and press OK. The POWER
INDICATOR menu is displayed.
4. Use the Up/Down Arrow buttons to select On or Off, then
press OK.
45
5