Dual MXD135BT Installation & Owner's Manual page 7

MXD135BT OPERATION
General Operation
Audio / Menu Press the AUDIO/MENU to select between Bass, Treble,
Balance, Fader, Loudness, Distance and Stereo.
FADER LOUDNESS EQ STEREO
BASS TREBLE BALANCE
Bass Press AUDIO/MENU until BAS appears.
Rotate the volume knob left/right to adjust.
(-7 minimum / +7 maximum)
Treble Press AUDIO/MENU until TRE appears.
Rotate the volume knob left/right to adjust.
(-7 minimum / +7 maximum)
Balance Press AUDIO/MENU until BAL appears. Rotate the volume
knob left/right to adjust from 10L (left) to 10R (right). "BAL
EVEN" represents equal balance.
Fader Press AUDIO/MENU until FAD appears. Rotate the vol-
ume knob left/right to adjust from 10R (rear) to 10F (front).
"FADER EVEN" represents equal balance.
Loudness Press AUDIO/MENU until LOUD ON or LOUD OFF appears,
then rotate the volume knob to select desired option.
Activating this feature will enhance the bass and treble fre-
quencies when listening to music at low volumes.
EQ Press AUDIO/MENU until EQ appears, then rotate the volume
knob to
select between the following preset equalization curves:
FLAT, POP, JAZZ, ROCK and OFF.
Stereo / Mono From tuner mode only, press AUDIO/MENU until STEREO
or MONO appears, then rotate the volume knob to select
desired option. Selecting MONO can improve listening in
areas with a weak FM signal.
Setup Menu
Press and hold AUDIO/MENU for more than 3 seconds to
access the setup menu. Press AUDIO/MENU momentarily
to select between the menu functions and rotate the volume
knob left/right to adjust or activate the desired function.
Options are outlined on the following page.
7