Salus RE10RF Installer's/User's Manual

RE10RF 009 Quark9_Layout 1 10.02.2015 11:39 Strona 1
DELETING THE REPEATER FROM THE NETWORK
After you have deleted the repeater from the ZigBee network,
it will need to be re-installed.
Also, if you delete the repeater, all the thermostats connected
to the repeater will lose their connection to the network.
Press button on the
Repeater for 15
seconds to delete it
from the network.
The button colour
changes to amber
to indicate deletion.
At this point,
you cannot cancel
the procedure.
WARRANTY
SALUS Controls warrants that this product will be free from any defect in materials or
workmanship, and shall perform in accordance with its specification, for a period of five years
from the date of installation. SALUS Controls sole liability for breach of this warranty will be
(at its option) to repair or replace the defective product.
Customer Name: .............................................................................................................................
Customer Address: ..........................................................................................................................
............................................................................... Post Code: ........................................................
Tel No: ........................................................ Email: .........................................................................
Engineers Company: .......................................................................................................................
Tel No: ......................................................... Email: ........................................................................
Instalation Date: ..............................................................................................................................
Engineers Name: ............................................................................................................................
Engineers Signature: .......................................................................................................................
TECHNICAL DETAIL
Model RE10RF
Type ZigBee Repeater
Function ZigBee network repeater for iT600 system
Control Open - Close the ZigBee network
Indication Bi-Colour LED: RED - AMBER
User Interface Single push button
Operating Temperature 0 to 45 ºC
Storage Temperature -20ºC to 60ºC
Frequency 2.4 GHz
Power Source 230V 50Hz via mains adaptor (supplied)
Approval CE
ZigBee Repeater
Models: RE10RF
I N S TA L L E R / U S E R M A N U A L
SALUS Controls plc
SALUS House
Dodworth Business Park South,
Whinby Road,
Dodworth, Barnsley S75 3SP, UK.
SALES: T: +44 (0) 1226 323961
E: sales@salus-tech.com
TECHNICAL: T: +44 (0) 1226 323961
E: tech@salus-tech.com
www.salus-controls.com
SALUS Controls is a member of the Computime Group
Maintaining a policy of continuous product
development, SALUS Controls plc reserves the right
to change specification, design and materials of
products listed in this brochure without prior notice.
For PDF Installation guide go to
www.salus-controls.com
00086/2 Issue Date: DEC 2014