Soleus Air GPS Pulse User Manual

Hide thumbs Also See for GPS Pulse:

Advertisement

Quick Links

Introduction
Thank you for purchasing the Soleus GPS Pulse watch. This product uses an Electro-optical
technology to sense the heart beat. It has two LED beams and electro-optical cell to sense
the volume of blood under your skin.
Note that the actual color of the watch and artwork may vary from style to style.
How to wear the watch properly in your forearm:
• Fasten the watch snugly so that the optical sensor makes a tight contact with your skin.
The tighter you can wear the watch the better.
• Wear the watch not on your wrist bone but higher on your forearm.
Important note:
Before starting your exercise
You may need to tighten the strap.
**
After sweating, you have to tighten the watch again for more accurate
measurement.
Make sure the heart rate reading is already stable.
Minimize extreme wrist movement while the HR is in use
Caring for your Watch:
Clean your Watch with a dampened cloth preferably with mild detergent solution. Wipe dry
using a dry cloth. Do not use chemical cleaners and solvents that may damage plastic
components.
Do not store your Watch to prolonged exposure to extreme temperatures as this may result to
permanent damage to your unit.

Getting Started

Step 1) Know your Watch:
• This product has also a GPS function with the following main modes as you press S7:
TIME, RUN, CHRONO, TIMER, HRM, DATA, ALARM and SET mode.
Push button main function:
Caution:
• Consult your doctor before you begin a new exercise program.
• This watch provides heart rate measurements. However, this is not a medical device.
• This watch may affect pacemakers. If you have any concerns, consult your doctor
before using this watch.
Soleus GPS Pulse

Advertisement

Table of Contents
loading

Summary of Contents for Soleus Air GPS Pulse

  • Page 1: Getting Started

    Clean your Watch with a dampened cloth preferably with mild detergent solution. Wipe dry Thank you for purchasing the Soleus GPS Pulse watch. This product uses an Electro-optical using a dry cloth. Do not use chemical cleaners and solvents that may damage plastic technology to sense the heart beat.
  • Page 2: Step 2) Charging The Battery

    Soleus GPS Pulse Step 2) Charging the Battery: Step 3) Configure your Watch: Charge the unit for at least 4-5 hours before first use. The length of time for a fully charged Before using your watch, please set your Watch.
  • Page 3 Soleus GPS Pulse How to set the TIME: Year range: 2001 to 2099 • Total of 36 city codes are available for various Time zones. • TIME 1/ Time 2 setting: Time can be displayed in 12 hour or 24 hour format •...
  • Page 4 Soleus GPS Pulse How to set USER details: How to set the NIGHT mode function: Press S5 while USER is blinking. MALE will start to blink. • Press S5 while NIGHT is blinking. The watch will display 10 seconds blinking.
  • Page 5 Soleus GPS Pulse Night mode settings: Press S5 to confirm and set the T1 or T2 setting. T1 or T2 starts to blink. The alarm time • 10 SECONDS – Press S11 will turn ON the Light for 10 seconds.
  • Page 6 Soleus GPS Pulse How to set the TIMER: 3.2) TIME, NIGHT, CONTRAST and ALERT, can also be set in TIME quick SET mode. Press S5 while TIMER is blinking. The segment number will start to blink. • Press and hold S11 while in Time mode. TIME will start to blink.
  • Page 7: Step 4) Acquire Satellite Signals

    Soleus GPS Pulse 3.5) ALARM can also be set in ALARM quick SET mode. • Press and hold S11 until alarm digit “1” blinks. • Press S5 to set the hour, minute, T1/T2 and Alarm On/Off, Daily Alarm (MON to SUN) and Chime.
  • Page 8 Soleus GPS Pulse You will hear a beep sound when the Watch has received a GPS signal or when the GPS 4.4) How to turn OFF the GPS: signal has been lost. LOST GPS signal will also be displayed in the screen.
  • Page 9 Soleus GPS Pulse Step 6) Go for a RUN: 6.1.2. How to START, TAKE LAP, STOP, and SAVE: 6.1) Using RUN mode: • Press S1 to start or re-start. • Press S11to take LAP. If auto lap function is set, the watch will take lap automatically 6.1.1.
  • Page 10 Soleus GPS Pulse The watch will take Auto Lap based on the Distance set in Auto Lap setting. v 6.1.3. How to change views in RUN mode: • Press S5 while CHRONO is running to change the information displayed in Line1: 6.2) Using Chronograph mode:...
  • Page 11 Soleus GPS Pulse 6.2.2) How to START, take LAP, STOP, and SAVE: • Press S1 to start or re-start. The watch will remember your previous screen the next time you come back to CHRONO v • Press S11to take LAP. If auto lap function is set, the watch will take lap automatically mode.
  • Page 12: Using Timer Mode

    Soleus GPS Pulse 6.3) Using TIMER mode: RUN mode & TIMER mode has the same chronograph counter. When the chronograph is started or stopped in RUN mode, the same thing happens in TIMER mode. The watch has 6 interval timers segment 1 to segment 6.
  • Page 13 Soleus GPS Pulse The watch will take Auto Lap based on the Distance set in Auto Lap setting. v 6.3.3. How to change views in TIMER mode: •   P ress S5 while CHRONO is running to change the information displayed in Line 2.
  • Page 14 Soleus GPS Pulse 6.4.1. How to enter HRM mode. • Press S7 from Time to go to HRM mode. The watch will prompt you to GPS GO (if Satellite signal already received) or INDOOR (if no signal received). 6.4.3. How to START, take LAP, STOP, and SAVE: •...
  • Page 15: General Operations

    Soleus GPS Pulse This Watch has a Night mode function. Following are the options in SET mode and their functions: 10 SECONDS – Press S11 will turn ON the Light for 10 seconds. 20 SECONDS – Press S11 will turn ON the Light for 20 seconds.
  • Page 16: Data Mode

    Soleus GPS Pulse Please follow the function flow as shown. DATA mode How to enter DATA mode, view details, and delete Data: Press S7 to go to Data mode. The watch will momentarily display DATA and then the • latest data file. If there is no data available, it will display DATA - - - -.
  • Page 17: Alarm Mode

    Soleus GPS Pulse Data numbering system/ Legend: ALARM mode Alarm will sound for 20 seconds at alarm time. Pressing any button will stop the alarm • sound without the button function. When Alarm is ON, the alarm icon is displayed in all modes.
  • Page 18 Soleus GPS Pulse Battery: GPS watch troubleshooting guide: The Watch is using a rechargeable Lithium Ion battery that will require approximately 4-5 PROBLEM/ QUESTION SOLUTION/ ANSWER hours charging time using the USB cable. While battery is charging, the Watch cannot be Take your GPS Watch outdoors and away from trees and used and all buttons are disabled.

Table of Contents