Table of Contents
Advertisement
Operating Instructions
(continued)
TO CHANGE TEMPERATURE DISPLAY:
PRESS AND HOLD THE
UP/DOWN BUTTONS
TOGETHER FOR 3 SECONDS
Note: The control is capable of displaying temperature in degrees Fahrenheit or degrees Celsius.
TO TURN UNIT OFF:
Note: When unit is shut off in the Heat Mode, the fan will continue to run for a few seconds to dissipate residual heat within the unit.
Now that you have mastered the operating procedure, here are more features in your control that you should become familiar with.
The "Cool" circuit has an automatic 3 minute time delayed start if the unit is turned off and on quickly.
This prevents overheating of the compressor and possible circuit breaker tripping. The fan will continue
to run during this time.
There is a 2-Second delay for the compressor shutting down when selecting FAN ONLY/HEAT. This is to cover the possibility of
having to roll through to select another mode.
The control will maintain the set temperature within 2 degrees Fahrenheit, between 60F and 90F degrees (in cool mode), 55F
and 80F degrees (in heat mode).
After a power outage, the unit will memorize the last setting and return the unit to the same setting once power is restored.
(4-WAY)
DO THIS:
DO THIS:
PRESS
ON/OFF BUTTON
ADDITIONAL THINGS YOU SHOULD KNOW
4-Way Air Directional Louvers
The 4-Way air directional louvers allow you to direct the air flow Up or Down
and Left or Right throughout the room as needed. To adjust the air direc-
tional louvers side-to-side, use the center handle as you move it side-to-side.
Operating Instructions
YOU WILL SEE:
YOU WILL SEE:
9
Advertisement
Table of Contents
