Table of Contents
Advertisement
QQ
3 7 63 1515 0
Selected setting
SCREEN SETUP
TV TYPE:
4:3 PAN SCAN
SCREEN SAVER:
ON
BACKGROUND:
JACKET PICTURE
LINE:
VIDEO
ON
COMPONENT OUT:
MODE
:
AUTO
(PROGRESSIVE)
To enter the Quick Setup mode
Select "QUICK" in step 3. Follow from step
5 of the Quick Setup explanation to make
basic adjustments (page 24).
To reset all of the "SETUP" settings
1
Select "RESET" in step 3 and press
ENTER.
2
Select "YES" using X/x.
You can also quit the process and return
to the Control Menu by selecting "NO"
here.
3
Press ENTER.
All the settings explained on pages 66 to
71 return to the default settings. Do not
press [/1 while resetting the player,
which takes a few seconds to complete.
TE
L 13942296513
66
• When "LINE" is set to "RGB" in "SCREEN
SETUP", you cannot select "COMPONENT
OUT" (the player outputs no component video
signals).
• When "COMPONENT OUT" is set to "ON" you
cannot select "RGB."
◆ COMPONENT OUT
Allows your TV to receive signals from the
COMPONENT VIDEO OUT jacks.
ON
Select this if you connect your
TV to the player's
COMPONENT VIDEO OUT
jacks.
OFF
The player outputs no
component video signals
Notes
• When you connect the player to a monitor or
projector via only the COMPONENT VIDEO
OUT jacks, do not select "OFF." If you select
"OFF" in this case, the picture may not appear.
• When you set NORMAL/PROGRESSIVE switch
to PROGRESSIVE, you cannot select "LINE"
and "COMPONENT OUT."
◆ MODE (PROGRESSIVE) (conversion
modes)
You can fine-tune the Progressive 525p/625p
video signal output when you set the
NORMAL/PROGRESSIVE switch to
PROGRESSIVE (the PROGRESSIVE
indicator lights up) and connect the player
using the COMPONENT VIDEO OUT jacks
to a TV that is able to accept the video signal
in progressive format.
DVD software can be divided into two types:
film based software and video based
software. Video based software is derived
from TV, such as dramas and sit-coms, and
displays images at 30 frames/60 fields (25
www
frames/50 fields) per second. Film based
software is derived from film and displays
images at 24 frames per second. Some DVD
software contains both Video and Film.
In order for these images to appear natural on
your screen when output in PROGRESSIVE
.
mode (50 or 60 frames per second), the
progressive video signal needs to be
converted to match the type of DVD software
that you are watching.
68
http://www.xiaoyu163.com
Setting the Display or
Sound Track Language
(LANGUAGE SETUP)
"LANGUAGE SETUP" allows you to set
various languages for the on-screen display or
sound track.
Select "LANGUAGE SETUP" in the Setup
Display. To use the display, see "Using the
Setup Display" (page 65).
LANGUAGE SETUP
OSD:
ENGLISH
MENU:
ENGLISH
AUDIO:
ORIGINAL
SUBTITLE:
ENGLISH
◆ OSD (On-Screen Display)
Switches the display language on the screen.
◆ MENU (DVD VIDEO only)
You can select the desired language for the
disc's menu.
◆ AUDIO (DVD VIDEO only)
Switches the language of the sound track.
When you select "ORIGINAL," the language
given priority in the disc is selected.
◆ SUBTITLE (DVD VIDEO only)
Switches the language of the subtitle recorded
on the DVD VIDEO.
When you select "AUDIO FOLLOW," the
language for the subtitles changes according
to the language you selected for the sound
track.
z Hint
If you select "OTHERS t" in "MENU,"
"SUBTITLE," or "AUDIO," select and enter a
language code from "Language Code List" on
page 79 using the number buttons.
Note
If you select a language in "MENU,"
"SUBTITLE," or "AUDIO" that is not recorded on
a DVD VIDEO, one of the recorded languages will
be automatically selected.
AUTO
Automatically detects the
software type (Film-based or
Video-based) and selects the
appropriate conversion mode.
Normally select this position.
VIDEO
Fixes the conversion mode to
the mode for Video-based
software.
Note
When you play video based software with
progressive signals, sections of some types of
images may appear unnatural due to the conversion
process when output through the COMPONENT
VIDEO OUT jacks.
x
ao
u163
y
i
http://www.xiaoyu163.com
2 9
8
Settings for the Display
(SCREEN SETUP)
Choose settings according to the TV to be
connected.
Select "SCREEN SETUP" in the Setup
Display. To use the display, see "Using the
Setup Display" (page 65).
The default settings are underlined.
SCREEN SETUP
TV TYPE:
SCREEN SAVER:
BACKGROUND:
JACKET PICTURE
LINE:
VIDEO
COMPONENT OUT:
MODE
:
AUTO
(PROGRESSIVE)
◆ TV TYPE
Selects the aspect ratio of the connected TV
(4:3 standard or wide).
16:9
Select this when you connect a
wide-screen TV or a TV with a
wide mode function.
4:3
Select this when you connect a
LETTER
4:3 screen TV. Displays a wide
BOX
picture with bands on the upper
and lower portions of the
screen.
4:3
Select this when you connect a
PAN SCAN
4:3 screen TV. Automatically
displays the wide picture on the
entire screen and cuts off the
portions that do not fit.
16:9
4:3 LETTER BOX
4:3 PAN SCAN
Q Q
3
6 7
1 3
Custom Settings
(CUSTOM
SETUP)
Use this to set up playback related and other
settings.
Select "CUSTOM SETUP" in the Setup
Display. To use the display, see "Using the
Setup Display" (page 65).
The default settings are underlined.
CUSTOM SETUP
AUTO POWER OFF:
AUTO PLAY:
DIMMER:
BRIGHT
PAUSE MODE:
TRACK SELECTION:
MULTI-DISC RESUME:
◆ AUTO POWER OFF
Switches the Auto Power Off setting on or
off.
ON
The player enters standby mode
when left in stop mode for more
than 30 minutes.
OFF
Switches this function off.
◆ AUTO PLAY
Switches the Auto Play setting on or off. This
function is useful when the player is
connected to a timer (not supplied).
OFF
Switches this function off.
ON
Automatically starts playback
when the player is turned on by
a timer (not supplied).
◆ DIMMER
Adjusts the lighting of the front panel display.
BRIGHT
Makes the lighting bright.
DARK
Makes the lighting dark.
.
1-16
9 4
2 8
Note
Depending on the DVD, "4:3 LETTER BOX" may
be selected automatically instead of "4:3 PAN
SCAN" or vice versa.
◆ SCREEN SAVER
The screen saver image appears when you
leave the player in pause or stop mode for 15
minutes, or when you play a CD or DATA
CD (MP3 audio) for more than 15 minutes.
The screen saver will help prevent your
display device from becoming damaged
(ghosting). Press H to turn off the screen
saver.
16:9
ON
ON
Turns on the screen saver.
OFF
Turns off the screen saver.
ON
◆ BACKGROUND
Selects the background colour or picture on
the TV screen when the player is in stop mode
or while playing a CD or DATA CD (MP3
audio).
JACKET
The jacket picture (still picture)
PICTURE
appears, but only when the
jacket picture is already
recorded on the disc (CD-
EXTRA, etc.). If the disc does
not contain a jacket picture, the
"GRAPHICS" picture appears.
GRAPHICS A preset picture stored in the
player appears.
BLUE
The background colour is blue.
BLACK
The background colour is
black.
◆ LINE
Selects video signals output from the LINE
(RGB)-TV jack on the rear panel of the
player.
VIDEO
Outputs video signals.
S VIDEO
Outputs S video signals.
RGB
Outputs RGB signals.
Notes
• If your TV does not accept S video or the RGB
signals, no picture will appear on the TV screen,
even if you select "S VIDEO" or "RGB." Refer to
the instructions supplied with your TV.
1 5
0 5
8
2 9
9 4
• If your TV has only one SCART (EURO AV)
jack, do not select "S VIDEO."
, continued
◆ PAUSE MODE (DVD VIDEO/DVD-RW
only)
Selects the picture in pause mode.
AUTO
The picture, including subjects
that move dynamically, is
output with no jitter. Normally
select this position.
FRAME
The picture, including subjects
that do not move dynamically,
is output in high resolution.
◆ TRACK SELECTION (DVD VIDEO only)
Gives the sound track which contains the
ON
highest number of channels priority when you
OFF
play a DVD VIDEO on which multiple audio
AUTO
formats (PCM, MPEG audio, DTS, or Dolby
OFF
ON
Digital format) are recorded.
OFF
No priority given.
AUTO
Priority given.
Notes
• When you set the item to "AUTO," the language
may change. The "TRACK SELECTION" setting
has higher priority than the "AUDIO" settings in
"LANGUAGE SETUP" (page 66).
• If you set "DTS" to "OFF" (page 71), the DTS
sound track is not played even if you set "TRACK
SELECTION" to "AUTO."
• If PCM, DTS, MPEG audio, and Dolby Digital
sound tracks have the same number of channels,
the player selects PCM, DTS, Dolby Digital, and
MPEG audio sound tracks in this order.
◆ MULTI-DISC RESUME (DVD VIDEO/
VIDEO CD only)
Switches the Multi-disc Resume setting on or
off. Resume playback can be stored in
memory for up to 6 different DVD VIDEOs/
m
VIDEO CDs (page 30).
ON
Stores the resume setting in
memory for up to six discs.
co
OFF
Does not store the resume
setting in memory. Playback
restarts at the resume point only
for the current disc in the player.
9 9
2 8
9 9
67
69
Advertisement
Table of Contents
