Advertisement
Offloading Data
Copying files to your computer
1. CONNECT SSD DRIVE TO ADAPTER
Connect the Convergent Design 2.5" Premium SSD Media to any off-the-shelf 2.5" SATA adaptor
(example: Seagate GoFlex Thunderbolt Adaptor or USB 3.0 Adaptor)
2. CONNECT ADAPTER TO COMPUTER
The SSD will mount within 10-20 Seconds. (You will see this mount on the desktop or within finder
on MAC, or within My Computer on Windows machines).
3. COPY FILES FOR PLAYBACK/EDITING
All Clips or Takes are located within the "Clips" directory, navigate to this and copy all of your files
to a local or external drive or RAID for playback and/or editing.
Software Utilities (Free Download from Website)
CD Clip Merger (RAW/DPX)
Use the Clip Merger for any Raided Record (ie if your recorded clip required more than one SSD).
See the At A Glance Chart, "No. of SSD's Req" column, on page 2.
CD Apple ProRess Transfer Tool (Free Download from Website)
Use to combine clips into a single file
Use to copy all files to a single directory without folder structure.
Required in order to transfer markers to your NLE.
CD Data Unpacker (DPX)
Use CD Data Unpacker to convert "packed" files to "unpacked" data.
ALL UTILITIES CAN BE DOWNLOADED FROM THE FIRMWARE/DOWNLOADS AREA OF OUR
WEBSITE:
ATTENTION MAC OSX USERS
Before installing Convergent Design Software on Mac OSX You must first change the following
settings.
1) Navigate to Applications » Utilities » System Preferences
2) Select Security and privacy
3) Under General » Allow applications downloaded from: Select Anywhere.
You will now be able to run the installer for installing any Convergent Design Applications.
Convergent-Design.com
Convergent-Design.com/support/firmware-downloads.html
[7]
Advertisement
