Vivotek CC8130(HS) User Manual page 188

VIVOTEK
Examples:
1. setvi.cgi?vi0=0(15000)1
2. setvi.cgi?vi0=1
Request 2 will not be accepted during the execution time(15 seconds).
8.23 Open Timeshift Stream (capability.timeshift > 0,
timeshift_enable=1, timeshift_c<n>_s<m>_allow=1)
Note: This request requires Viewer access privileges.
Syntax:
For HTTP push server (MJPEG):
http://<servername>/<network_http_s<m>_accessname>?maxsft=<value>[&tsmode=<value>&refti
me=<value>&forcechk&minsft=<value>]
For RTSP (MP4 and H264), the user needs to input the URL below into an RTSP compatible player.
rtsp://<servername>/<network_rtsp_s<m>_accessname>?maxsft=<value>[&tsmode=<value>&refti
me=<value>&forcechk&minsft=<value>]
"n" is the channel index.
"m" is the timeshift stream index.
For details on timeshift stream, please refer to the "TimeshiftCaching" documents.
PARAMETER VALUE
maxsft <positive
integer>
tsmode normal,
adaptive
reftime mm:ss
188 - User's Manual
DEFAULT DESCRIPTION
0 Request cached stream at most how many seconds
ago.
normal Streaming mode:
normal => Full FPS all the time.
adaptive => Default send only I-frame for MP4 and
H.264, and send 1 FPS for MJPEG. If DI or motion
window are triggered, the streaming is changed to
send full FPS for 10 seconds.
(*Note: this parameter also works on non-timeshift
streams.)
The time Reference time for maxsft and minsft.
camera (This provides more precise time control to eliminate
receives the the inaccuracy due to network latency.)
request. Ex: Request the streaming from 12:20
83