Samsung 450S Installation Manual page 27

Hotel TV Function
No
Category
External Source Banner
7 External Source
8 HP Management
9 Eco Solution
10 Cloning
11 System
Item initial value
USB Pop-up Screen
Auto source
Anynet+Return Source Power On Src
HP Mode
Default HP Volume
Main Speaker
Energy saving
Clone TV to USB
Clone USB to TV
Setting Auto Intialize
Self Diagnosis for TV
SW Update
Service Pattern
Sound Bar Out
Contact Samsung
Standby LED
TV reset
When a USB device is connected to the TV :
• Default : A popup window appears.
Default
• Automatic : Opens the USB contents menu automatically.
• Disable : Neither the popup window nor the menu appears.
If set to On, the TV displays the External Source Banner (information) when
you change the TV source to another external input, press the Info key, or
turn the TV on.
ON
• On : The External Source information is displayed on the TV screen.
• Off : The External Source information is not displayed on the TV screen.
• On : When an external input source is connected to the TV, the TV
identifies the input source, and then automatically switches to that input
OFF
source.
• Off : Auto Source function is Off.
Select the return TV source after stopping an Anynet+(HDMI-CEC)
connection. (This fuction is especially useful for the Guestlink RJP.)
OFF
For the specific situation, pls see the table above.
...
ON
Adjusts the brightness of the TV to reduce power consumption.
• Off: Turns off the energy saving function.
• Low: Sets the TV to low energy saving mode.
OFF
• Medium: Sets the TV to medium energy saving mode.
• High: Sets the TV to high energy saving mode.
Clone the current TV options to a USB memory device.
-
Clone the saved TV options on a USB memory device to the TV.
-
When Setting Auto Initialize is set to On, and the power is turned off and on
or the Master Power is turned off and on, the data is restored to the cloned
values. If there is no cloned value, even when the Setting Auto Initialize is
OFF
set to On, it will be ignored and the operation will be the same as that when
Setting Auto Initialize is set to Off.
Enter Self Diagnosis Menu.
− Picture Test: Use to check for picture problems. If the problem appears
in the test picture, select Yes and follow the directions on the screen.
...
− Sound Test: Use the built-in melody sound to check for sound prob-
lems. If the problem occurs during the test, select Yes and follow the
directions on the screen.
SW USB Update function.
...
Same function with SVC Service Pattern.
OFF
An external device such as a Samsung Sound Bar can be connected
to the TV via an Anynet Connection and the TV Sound can be routed to
the Sound Bar Device. If the feature is OFF in the Hotel Factory Menu,
OFF
this functionality is disabled The main TV Speaker will be muted while the
Sound Bar option is ON and the Speaker is connected through HDMI.
Samsung Contact information.
...
• On: The Function IR is On when Standby.
ON
• Off: The Function IR is Off when Standby.
Factory reset
...
Description
English
27